Andrew ES45T Bedienungsanleitung PDF herunterladen (Seite 28)

Installation Procedures

Step 12

Step 13

Step 14

Install last reflector panel (C-D) by loosely attaching to diameter setting bands and

mounting ring hub. Loosely attach panel seam hardware as installer inside moves

reflector segment to enable segment union.

Loosely attach retaining bar (P/N 49997) to mounting ring hub (P/N 202429). Loosely

attach center plate (P/N 49964-2) to concave side of reflector.

•

Insert capscrew hardware from plate (concave side of reflector) to retaining bar

Insert shim (P/N 200215) between each reflector segment around perimeter of reflector

assembly. Refer to Figure 28B. Tighten setting band and joining plate hardware (P/N

49693).

Panel

Seams (6)

Temporary

Supports (6)

Refer to

Figure 31

Line of Sight

(0.0° Elevation)

Steel Rule

0.03-0.06 Inch

Increment

(0.5-1.0 mm)

Pointed Measuring Rod

6’ (1.8 m)

Reflector

Diameter Setting Band

Temporary Support

12 Inch (300 mm)

Shim Stack - Not

Shown for Clarity

Approx. 10 Feet (3 m)

Theodolite,

Transit or

Laser Level

Reflector

Turn Back

ES45T-R Reflector Assembly

Figure 30

Figure 29

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 80 81

Keine Kommentare

Andrew ES45T Bedienungsanleitung Seite 28