Andrew 7.6-Meter ESA Bedienungsanleitung PDF herunterladen (Seite 23)

Elevation

Jackscrew

Assembly

Step 1

Step 2

Installation Procedures

Attach 301771/301736 elevation jackscrew assembly to 201596 mounting plates as

shown in Figure 25. Tighten connection.

• Use 7/8 x 2-1/2 bolts and nuts

Figure 25

Loosen rubber boot from end of jackscrew. Turn elevation drive screw to extend jack to

dimension 67.7 in (1719 mm) as shown in Figure 26. Apply grease to screw shaft.

Reattach rubber boot.

Figure 26

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 68 69

Keine Kommentare

Andrew 7.6-Meter ESA Bedienungsanleitung Seite 23